19
Network Configuration for Windows XP:
The following is an example of how to configure the Windows XP TCP/IP network settings:
Step 1: At the Windows XP Desktop, click
“
Start
”, then select and click on the
“
Control Panel
” item as shown in the
screen below.
Step 2: At the Control Panel window, select
and double click on the “
Network and
Internet Connections
” icon.
Step 3: In the Network and Internet
Connections window, click on the “
Network
Connections
” icon located in the lower
right corner of the window.
Step 4: In the Network Connections window,
click on the “
Local Area Connection
” icon for
your Ethernet adapter. Then click on the
“
Properties
” button in the Local Area
Connection Status panel. In the Local Area
Connections Properties panel, select the
“
Internet Protocol (TCP/IP)
” item and then click
on the “
Properties
” button.
Step 5: In the Internet Protocol (TCP/IP)
Properties panel, select “
Obtain an IP address
automatically
”. Click the “
OK
” button at the
bottom of the panel. Close each panel by
pressing the “
OK
” buttons.
Step 6: You should now be able to access the
PCX5000 configuration pages. Launch the
browser and open location:”
http://192.168.100.1
” Proceed to the
“
Configuring the PCX5000 Gateway
” section
of this manual.
