Toshiba MW26H82 Owner'S Manual Download | Manualshive

Page: 18 / 84

background image

18

Connections

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier
equipped with an MPEG2 audio decoder or MPEG2 audio processor.

Connecting to an amplifier equipped with a MPEG audio decoder

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).

Notes:

• DO NOT connect the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the unit to the AC-3

RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompat-
ible with the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the unit.

• Connect the OPTICAL DIGITAL AUDIO OUT jack or COAXIAL DIGITAL AUDIO OUT jack of the unit to the “OPTICAL” or

“COAXIAL” input of a Receiver or Processor.

• Refer to the owner’s manual of the connected equipment as well.
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall

outlet before making any connections.

• The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening

level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the unit’s power cord. If you leave the amplifier’s power on, the

speakers may be damaged.

Amplifier equipped with an

MPEG2 audio decoder

To COAXIAL
type digital
audio input

75

Ω

coaxial cable (not supplied)

Amplifier equipped with a

Digital audio input

To COAXIAL
type digital
audio input

75

Ω

coaxial cable (not supplied)

To COAXIAL DIGITAL
AUDIO OUT

To COAXIAL DIGITAL
AUDIO OUT

To OPTICAL type
digital audio input

Optical digital cable (not supplied)

To OPTICAL DIGITAL AUDIO
OUT

Optical digital cable (not supplied)

To OPTICAL DIGITAL AUDIO OUT

To OPTICAL type digital
audio input

Connect either

Connect either

Rear of the unit

Rear of the unit

Connecting to optional equipment (Continued)

5V90101A [E]p13-19

8/4/06, 5:43 PM

18

«
...
16
17
18
19
20
...
»

Summary of Contents for MW26H82





















































































Reviews:

No comments

Related manuals for MW26H82

Brand: Coby Pages: 1

Brand: Hitachi Pages: 27

Brand: Schaub Lorenz Pages: 57

13MDTD20 - Dvd-video Player

Brand: Magnavox Pages: 54

DV225MG9 - DVD Player And 4 Head Hi-Fi Stereo VCR

Brand: Magnavox Pages: 2

Brand: Magnavox Pages: 28

Brand: Magnasonic Pages: 68

Brand: Symphonic Pages: 32

Brand: Symphonic Pages: 32

Brand: Symphonic Pages: 48

Brand: Symphonic Pages: 68

Brand: Pyle Pages: 34

Brand: Durabrand Pages: 2

Brand: Zenith Pages: 59

DV225MG9 - DVD Player And 4 Head Hi-Fi Stereo...

Brand: Magnavox Pages: 2

Brand: Magnavox Pages: 40

Brand: Panasonic Pages: 40

Brand: Samsung Pages: 106

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands