Toshiba MW20FP3 Owner'S Manual Download

Page: 34 / 64

Playback (VCR)

Cassette tape playback

To play a prerecorded tape.

Load a prerecorded tape:

(When loading a cassette tape without the erase
prevention tab, playback will start automatically).

Press PLAY on the front panel or on
the remote.
Playback will start. “

” will appear

on the screen for about 4 seconds.

Press STOP/EJECT once on the front
panel or press STOP on the remote.
The tape will stop but remain fully
loaded and ready to play.
“

” will appear on the screen for

about 4 seconds.

To stop playback:

Stop the playback or recording with STOP.

To stop the tape-winding, press STOP. To switch to play-
back directly (without STOP), press PLAY.

Notes:
• If you play a prerecorded tape after the DVD playback, you

must set the unit to TV/VCR mode using the TV/VCR button.

• This unit selects the playback tape speed SP or SLP auto-

matically.

• When you select the TV/VCR mode during DVD playback, DVD

playback will change to the still mode, and after 5 minutes it
will change to the resuming playback mode automatically.

To start playback:

Playback

Rewind or forward the tape

To rewind the tape:

Press REW on the front panel or press

REV on the remote.

To forward the tape:

Press FF on the front panel or press

FWD on the remote.

Forward/Reverse picture search mode

PLAY

STOP

REV

FWD

REV

PLAY

STOP

FWD

When the tape is being winded, you can switch to picture
search mode (see next page). To do this, press REV or
FWD again and hold it down. The unit will resume the
tape winding as soon as the button is released.

PLAY

REW

STOP/EJECT

TV/VCR

Illustration of MW20FP3

5L00301C [E]p33-37

20/4/04, 16:14

Summary of Contents for MW20FP3

































































Search results

Summary of Contents for MW20FP3

Reviews:

Related manuals for MW20FP3

Brands by name

Popular brands

Toshiba MW20FP3, Owner'S Manual

Search results

Summary of Contents for MW20FP3

Reviews:

Related manuals for MW20FP3

Brands by name

Popular brands