Toshiba MCY-MHP0404HT-E Engineering Data Book Download Page 46

Page: 46 / 48

Outdoor unit

5-10-2. Wiring connections

For this product, the connector conversion cable and additional clamp filter (Accessory) are used
according to the indoor unit to be connected.

For the corresponding unit and how to use the conversion cable and clamp filter, refer to the following description.

The connector conversion cable is not used for the indoor unit, but the additional clamp filter is used.

High Wall Type 3 series (MMK-AP***3H*)

• Mount the clamp filter (Accessory) to the connection wire (11 m) out of the PMV kit main body.

Refer to the mounting method.

• Remove the connector conversion cable mounted to the connection cable out of the PMV kit main body and then

connect it.

The additional clamp filter is not used for the indoor unit, but the connector conversion cable is used.

Indoor unit except above indoor units

Connection cable

Clamp filter
(Formerly attached)

Additional clamp filter
(Accessory)

Connector conversion cable

Indoor unit

Connection cable

Connector conversion cable

Indoor unit

Summary of Contents for MCY-MHP0404HT-E

















































Search results

Summary of Contents for MCY-MHP0404HT-E

Reviews:

Related manuals for MCY-MHP0404HT-E

Brands by name

Popular brands

Toshiba MCY-MHP0404HT-E, Engineering Data Book

Search results

Summary of Contents for MCY-MHP0404HT-E

Reviews:

Related manuals for MCY-MHP0404HT-E

Brands by name

Popular brands