Toshiba libretto U100 Series Maintenance Manual Download Page 165

Page: 165 / 374

3.20 ONLY ONE TEST

3 Tests and Diagnostics

libretto U100 Maintenance Manual (960-520)

[CONFIDENTIAL]

3-47

Subtest 07

CD/DVD Docker Dock/Undock

This subtest is executed with libretto DVD Dock installed.

Press

Enter

while pushing the eject button of the libretto DVD Dock after the

following message appears.

Slide Eject-SW, and press [Enter] Key

Press

Enter

without pushing the eject button of the libretto DVD Dock after

the following message appears.

Release Eject-SW, and press [Enter] Key

If the test ends successfully, the display returns to the ONLY ONE TEST

menu.

When the display returns to the ONLY ONE TEST menu, remove the

computer from the DVD dock.

Summary of Contents for libretto U100 Series























































































































































































































































































































































































Search results

Summary of Contents for libretto U100 Series

Reviews:

Brands by name

Popular brands

Toshiba libretto U100 Series, Maintenance Manual

Search results

Summary of Contents for libretto U100 Series

Reviews:

Brands by name

Popular brands