Toshiba libretto U100 Series Maintenance Manual Download Page 134

Page: 134 / 374

3 Tests and Diagnostics

3.6 System Test

3-16

[CONFIDENTIAL]

libretto U100 Maintenance Manual (960-520)

Subtest 03

Geyserville

If the CPU supports Gerserville (SpeedStep), this Subtest checks that the CPU
operating clock speed can be changed.

Subtest 04

Quick charge

This subtest checks the status for the quick charge.

Subtest 05

DMI read

This subtest displays the information in the Flash-ROM in the following
format.

*** DMI Data Display Ver X.XX ***

Model

Name

XXXXXXXXXXX

Version Number

: XXXXXXXXXXXX

Serial Number

: XXXXXXXX

Model Number

: XXXXXX-XXXXX

PCN/BND Number

: XXXXXXXXXXXX/XXX

UUID Number

: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Press [Enter] to EXIT

To exit this subtest and return to the SYSTEM test menu, press

Enter

Summary of Contents for libretto U100 Series























































































































































































































































































































































































Search results

Summary of Contents for libretto U100 Series

Reviews:

Brands by name

Popular brands

Toshiba libretto U100 Series, Maintenance Manual

Search results

Summary of Contents for libretto U100 Series

Reviews:

Brands by name

Popular brands