background image

3 CCD COLOR CAMERA

IK-TF7P2

INSTRUCTION MANUAL

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance 
with the instruction manual, may cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference in which case the user will be 
required to correct the interference at his own expense.

USER-INSTALLER CAUTION: Your authority to operate this FCC verified equipment could be voided if 
you make changes or modifications not expressly approved by the party responsible for compliance to 
Part 15 of the FCC Rules.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est comforme à la norme NMB-003 du Canada.

Following information is only for EU-member states:

In residential areas this product may cause radio interference, therefore this product must not be used 
in residential areas.

Following information is only for EU-member states:

The use of the symbol indicates that this product may not be treated as household waste.  
By ensuring this product is disposed of correctly, you will help prevent potential negative 
consequences for the environment and human health, which could otherwise be caused by 
inappropriate waste handling of this product. For more detailed information about the take-
back and recycling of this product, please contact your supplier where you purchased the 
product or consult.

This manual is made from recycled paper.

For Customer Use

Enter below the Serial No. 
w h i c h   i s   l o c a t e d   o n   t h e  
bottom of the cabinet. Retain 
this information for future ref-
erence.
Model No.:     IK-TF7P2
Serial No.:

120730c1_IK_TF7P2_EN.indd   1

12.7.30   1:18:58 PM

Summary of Contents for ik-tf7p2









































Reviews: