Toshiba HFC series, Installation Manual

Page: 22 / 47

– 21 –
Hydro Unit
Installation Manual
Electrical connection to hydro unit
• Remove the front cover and the electrical box cover
from the Hydro Unit.
• The Hydro Unit power cable must be sized in
accordance with refer to “Electrical supply/cable
specifications”.
• Connect the Hydro Unit power cable to Terminal 02
as shown below.
• Ensure the Hydro Unit power cable is secured using
the cable clamp fitted in the electrical box.
• Ensure the Hydro Unit power cable connection
terminals are tight.
Outdoor unit to hydro unit electrical
connection
▼
Fig. 7-22
• Ensure electrical circuits are isolated before
commencing work.
• The Outdoor Unit to Hydro Unit interconnecting
cable must be sized in accordance with refer to
“Electrical supply/cable specifications”.
• Connect the Outdoor Unit to Hydro Unit
interconnecting cable as shown in the diagram
above.
• Ensure the Outdoor Unit to Hydro Unit
interconnecting cable is secured using the cable
clamp fitted in the electrical box.
• Ensure the Outdoor Unit to Hydro Unit
interconnecting cable connection terminals are tight.
L N L1 L2 L3 N
TB02 TB02
▼
Fig. 7-21
Leakage
breaker
30mA
Leakage
breaker
30mA
Input power
220-230V
50Hz
Backup heater
220-230V ~ type
(3 kW type)
Backup heater
380-400V 3N~
type
(6,9 kW type)
Input power
220-230V 3N~
50Hz
N
L
1
3
2
1
3
2
TB
01
Leakage
breaker
30mA
Input
power
220-
230V~
50Hz
Outdoor unit Hydro unit
21-EN