Toshiba GRD130-210, Instruction Manual

Page: 74 / 183


73

6 F 2 S 0 7 5 7
•
Enter 0 (=ALM&BLK) to alarm and to block the tripping if detecting the AC input imbalance
and press the ENTER key. If alarming only, enter 1 (=ALM) and press the ENTER key.
Setting the OV protection
•
Select "OV prot." on the "Scheme sw" screen to display the "OV prot." screen.
/ 7 O V p r o t .
O V 1 E N 0 _
O f f / D T / I D M T / C
O V 2 E N 0
O f f / D T / I D M T / C
O V 3 E N 0
O f f / O n
<
OV1EN, OV2EN
>
To set the OV1 or OV2 delay type, do the following.
•
Enter 1 (=DT) or 2 (=IDMT) or 3 (=C) and press the ENTER key. If disabling the OV1 or
OV2, enter 0 (=Off) and press the ENTER key.
<
OV3EN
>
•
Enter 1 (=On) to enable the OV3 and press the ENTER key. If disabling the OV3, enter 0
(=Off) and press the ENTER key.
•
After setting, press the END key to display the following confirmation screen.
C h a n g e s e t t i n g s ?
E N T E R = Y C A N C E L = N
•
Press the ENTER (= Y) key to change settings and return to the "Scheme sw" screen.
Setting the UV protection
•
Select "UV prot." to display the "UV prot." screen.
/ 7 U V p r o t .
U V 1 E N 1 _
O f f / D T / I D M T / C
U V 2 E N 0
O f f / D T / I D M T / C
U V 3 E N 0
O f f / O n
V B L K E N
0
O f f / O n
<
UV1EN, UV2EN
>
To set the UV1 or UV2 delay type, do the following.
•
Enter 1 (=DT) or 2 (=IDMT) or 3(=C) and press the ENTER key. If disabling the UV1 or
UV2, enter 0 (=Off) and press the ENTER key.