*1: Only PCs with pre-installed operating systems are supported. Macintosh
®
computers and OS are not supported.
*2: In order for the device to transfer information using USB 2.0, the USB 2.0 protocol must be installed on the PC. If the PC can only
transfer at USB 1.1 speeds, then the device will transfer information using USB 1.1.
Perform the following procedures before using the gigabeat. Windows Media Player 10 and the Owner’s Manual are installed.
To transfer music, video and photo data to the gigabeat via PC, use Windows Media Player 10.
Note
• Even when Windows Media Player 10 is already installed on the PC, continue the installation procedure. Files necessary to work with
the gigabeat will be installed on the PC.
1 Insert the included CD-ROM into the PC.
2 Click the “Install Windows Media Player 10” button.
Even when Windows Media Player 10 is already installed on the PC, continue the installation procedure. Files necessary to work with
the gigabeat will be installed on the PC.
3 Follow the on screen instructions
Trademarks
• gigabeat and Plus Touch are trademarks of Toshiba Corporation.
• Microsoft, Windows, Windows Media and Windows Mobile are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
• Adobe, the Adobe logo and Reader are trademarks or registered trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
• Macintosh is a registered trademark of Apple Computer, Inc.
• The product names referred to in this manual may be registered trademarks or trademarks of their respective companies.
Q
Operating System
: Microsoft
®
Windows
®
XP Home Edition / XP
Professional / XP Media Center Edition
(Windows XP Service Pack 2 is recommended.)
Q
CPU
: 300MHz or faster (1.5GHz is recommended)
Q
RAM
: 128MB or more (512MB is recommended)
Q
Hard disk space
: 100MB or more
Q
Interface
: USB 2.0 / USB 1.1 (*2)
Q
Others
: CD-ROM Drive
PC Requirements (*1)
Summary of Contents for Gigabeat S MES30V
Page 9: ...5 2 Block diagram 2 1 Logic circuit block diagram ...
Page 10: ...6 2 2 Power circuit block diagram ...
Page 43: ......
