Toshiba GD-1170 Operator'S Manual Download Page 99

Page: 99 / 182

Press the [BOX NUMBER] button to enter the next menu, key in the
box number(s) (maximum 20 digits), and then press the [ENTER] but-
ton.

• If a password has been set, press the [PASSWORD] button to enter the next menu, key in the password (max-

imum 20 digits) and then press the [ENTER] button.

Press the [START] button.

• If the box number keyed in is not correct, "No entry" appears. If the password keyed in is not correct, "Invalid

number" appears. Key in the correct box number or password.

Inputting data in confidential / bulletin board mailbox

How to input a Fax data into a confidential mailbox or a bulletin board mailbox on the sender's side is
explained here.

Place the original(s).

•

P.26 “Setting originals”

Press the [FAX] button on the control panel.

Press the [OPTION] button and set the transmission conditions.

•

P.29 “4.Setting the Transmission Conditions”

Press the [ADVANCED] button to enter the advanced menu, and then
press the [ITU MAILBOX] button.

Summary of Contents for GD-1170























































































































































































Search results

Summary of Contents for GD-1170

Reviews:

Related manuals for GD-1170

Brands by name

Popular brands

Toshiba GD-1170, Operator'S Manual

Search results

Summary of Contents for GD-1170

Reviews:

Related manuals for GD-1170

Brands by name

Popular brands