Toshiba Encore 2, User Manual

Page: 60 / 107

To manually disconnect the Keyboard, tap Bluetooth Keyboard and
tap Remove device.
The touch pad might not work properly by immediate use after turning
on the Bluetooth keyboard. If it happens, turn off/on the keyboard
again and wait for over three seconds.
Reconnecting the Keyboard
Under any of the following conditions, the connection between your tablet
and the Keyboard will be lost.
Bluetooth is turned off on your tablet.
Keyboard is manually disconnected from tablet.
Keyboard is manually unpaired from tablet.
Tablet is powered off.
Keyboard is powered off.
Keyboard is in idle mode for 10 minutes.
Generally the Keyboard automatically searches the tablet and complete the
re-connection by pressing any key. However, if it is not the case, you can
try to turn off and on the Keyboard and/or turn off and on the tablet's
bluetooth. If you are still not able to get reconnected, you might need to
manually re-connect the keyboard.
Unpairing the Keyboard
If you will not use the Keyboard for a long time or no longer need it, you
might unpair it from your tablet by the following steps:
1.
On your tablet, tap Settings -> Change PC settings -> PC and
devices -> Bluetooth .
2. Tap Bluetooth Keyboard and tap Remove device to remove the
Keyboard.
Using the Touch Pad
The Touch Pad located in the palm rest might support the following
gestures:
Tap Tap once on the Touch Pad to activate an item,
such as an app.
Two-Finger Tap Tap once on the Touch Pad with two fingers
together to display a menu or other function
depending on the software you are using.
(Similar to right-click)
Pinch or stretch Place two fingers down on the Touch Pad and
move them toward each other (pinch) or away
from each other (stretch). This will show different
levels of information or visually zooms in or out.
User's Manual 4-24