2.
Plug the smaller connector of the Micro-USB cable into the Micro-USB
port on your Keyboard.
Figure 4-18 Charging the Keyboard
2-pin
3-pin
Product appearance depends on the model you purchased.
3.
Plug the AC adaptor into a live wall outlet.
A full charge takes about 3 hours.
If you are not going to use the Keyboard for a long period of time, turn it off
to conserve power.
Connecting your tablet to the Keyboard
Before you start using the Keyboard, it is necessary to do Bluetooth
pairing.This is required for the first time and after that, the system will
remember this keyboard until manually unpaired.
To complete the pairing, do the following:
1.
On the Keyboard, slide the Power switch to the Bluetooth position for
one second and release, the Bluetooth indicator starts blinking white
for pairing.
2.
On your tablet, swipe in from the right edge of your screen on the
desktop to open charms, and then tap
Settings -> Change PC
settings -> PC and devices -> Bluetooth
.
The Bluetooth function on your tablet is enabled by default. Your tablet
will just start scanning available Bluetooth devices, and you can see a
list of available Bluetooth devices for connection.
3.
Tap the device named
Bluetooth Keyboard
, a Bluetooth pairing
request window pops up. Follow the on-screen instructions to
complete pairing. You will see
Bluetooth Keyboard
as connected
after the pairing has been successfully completed.
Now the Keyboard is ready for use
If you want to pair more than one Keyboard with your tablet, it is
recommended to do pairing one by one.
One Keyboard only supports one tablet in Bluetooth connecting.
User's Manual
4-23
Summary of Contents for Encore 2
Page 1: ...User s Manual WT10PE A WT8PE B ...
Page 26: ...User s Manual 2 11 ...
