Toshiba E-STUDIO6529A, Manual

Page: 13 / 24

Using Fingerprint Authentication Function 13
Using Fi
n
g
erprint Authent
ic
a
tion
Function
0.
Using Fingerprint Authentication Function
You can register the fingerprint, perform the login operation using fingerprint authentication and delete the
registered fingerprint from the touch panel of the equipment.

Registering the fingerprint
In order to log into the equipment by means of fingerprint authentication, registration of the user’s fingerprint is
necessary.
To register the fingerprint, use a fingerprint reader.
[Enable] is required to be selected for [Fingerprint Registration Screen] on TopAccess.
1
Log into the equipment by means of the authentication method configured in it.
2
Press the user name displayed on the upper side of the screen.
3
Press [Fingerprint Registration] on the User Account screen.
4 Press [Registration] on the Fingerprint Registration screen.
5
Register the fingerprint by following the instructions on the screen.
Press [Cancel] to stop the registration.

When the registration has failed, remove your finger from the fingerprint reader and press [OK]. Place your finger
again and reattempt the registration.

It is recommended to register the fingerprint for 2 fingers per one user. If the registered fingerprint cannot be
identified, register it again or do so for a different fingerprint.

A fingerprint which is the same as one already existing cannot be registered.

When [Enable] is selected for [Guidance screen when Fingerprint is not registered] on TopAccess and a user whose
fingerprint is not registered attempts to log into the equipment, a message promoting the registration of a
fingerprint is displayed. Register the fingerprint by following the instructions on the screen.