background image

5.[Administration] Tab Page

[Registration] Item List    71

[Ad

ministration] Tab Pa

ge

[Save as file Setting] screen

You can specify the destination and how to save the scanned files.

8

File Name

Specify the default file name. You can either select the default setting 
[DocYYMMDD] or enter the file name in the box.

9

Fragment Message Size

Select the size of the message fragmentation.

Item name

Description

1

[Save] button

Saves the Save as file settings in the shared folder.

2

[Cancel] button

Cancels the operation.

3

File Format

Select the file format for the scanned image.

PDF (Multi)

 —Select this to save the scanned images as a Multi-page PDF 

file.

PDF (Single)

 — Select this to save the scanned images as Single-page PDF 

files.

TIFF (Multi)

 — Select this to save the scanned images as a Multi-page TIFF 

file.

TIFF (Single)

 — Select this to save the scanned images as Single-page TIFF 

files.

4

Destination

Select this checkbox to save the scanned file in a network folder.
Select the network folder from [Remote 1] and [Remote 2].
Settings you specified in [Administration] - [Setup] - [Save as File settings] are 
applied.

5

File Name

Specify the default file name. You can either select the default setting 
[DocYYMMDD] or enter the file name in the box.

Item name

Description

1

2

3

4

5

Summary of Contents for E-STUDIO2323AM





















































































Reviews: