Toshiba E-studio 5520c, Printing Manual, Page: 58 / 180

2 PRINTING FROM WINDOWS
56 Setting Up Print Options
‰ [Configuration] tab
The [Configuration] tab allows you to configure options. When any optional unit is installed in this equipment, set the
configuration of the machine on this tab. The [Configuration] tab can be displayed only from the Printers folder (and not
displayed when displaying the properties from the application’s print dialog box).
To perform settings on the [Configuration] tab menu, you need to select the printer driver of this equipment on the
Printers folder, and then click [File] menu, [Run as administrator] and select [Properties].
Enter the administrator password if required.
-
If the [File] menu is not displayed, press [Alt].
- If the [User account control] dialog box is displayed, click [Continue] in this dialog box.
1) Model Selection
This sets the model name of the equipment.
- e-STUDIO6530C/e-STUDIO6520C/e-STUDIO5520C
2) Drawers
This sets whether or not the optional drawers or Large Capacity Feeder (optional) are installed.
- None — Select this when neither drawer nor Large Capacity Feeder is installed.
- Drawer3 — Select this when the 3rd drawer (optional) is installed.
- Drawer3 & Drawer4 — Select this when 3rd drawer (optional) and 4th drawer (optional) are installed.
- LCF — Select this when the Large Capacity Feeder (optional) is installed.
Large Capacity Feeder (optional) is not available for some countries or regions.
3) External LCF
This sets whether or not the External Large Capacity Feeder (optional) is installed.
- None — Select this when a External Large Capacity Feeder (optional) is not installed.
- External LCF — Select this when a External Large Capacity Feeder (optional) is installed.
4) Finisher
This sets whether or not the Finisher (optional) is installed.
- None — Select this when a Finisher (optional) is not installed.
- Finisher — Select this when a Finisher (optional) is installed.
- Saddle Stitch Finisher — Select this when a Saddle Stitch Finisher (optional) is installed.
5) Hole Punch Unit
This sets whether or not the Hole Punch Unit (optional) is installed.
- None — Select this when a Hole Punch Unit (optional) is not installed.
- 2 Holes — Select this when a 2 Hole Punch Unit (optional) is installed.
- 2/3 Holes — Select this when a 2/3 Hole Punch Unit (optional) is installed.
- 4 Holes (F) — Select this when a 4 hole (F) punch unit (optional) is installed.
- 4 Holes (S) — Select this when a 4 hole (S) punch unit (optional) is installed.
1
3
2
4
5
7
6
8
9