Toshiba E-studio 5520c, Printing Manual, Page: 27 / 180

2.PRINTING FROM WINDOWS
Setting Up Print Options 25
2 PRINTING FROM WINDOWS
3) Manual Scale
Select this check box to manually enter the scale, to enlarge or reduce an image. The ratio can be set between 25 and
400%. This function cannot be used when Drawer or Large Capacity Feeder (optional) is selected for the Paper
Source or the Magazine sort function is enabled.
For the detailed instructions on how to print with the [Manual Scale] setting, see the following page:
P.65 “Fitting images within paper size”
4) Paper Source
This selects the paper source. Please select a paper source that correlates with the printing size.
- Auto — Automatically selects the paper set in this equipment according to the printed document size.
- Drawer 1 — Paper is fed from the 1st Drawer.
- Drawer 2 — Paper is fed from the 2nd Drawer. This cannot be selected if Drawer 3 and 4 are not installed.
- Drawer 3 — Paper is fed from the 3rd Drawer (optional). This cannot be selected if Drawer 3 (optional) and 4
(optional) are not installed.
- Drawer 4 — Paper is fed from the 4th Drawer (optional). This cannot be selected if Drawer 3 (optional) and 4
(optional) are not installed.
- LCF — Paper is fed from the Large Capacity Feeder (optional). This cannot be selected if the Large Capacity
Feeder (optional) is not installed.
- Bypass Tray — Paper is fed from the Bypass Tray. When this is selected and print a job, [JOB STATUS] on the
touch panel will blink. Press [JOB STATUS] and check the paper size of the job. Then set the paper and press the
[START] button to print a job.
- External LCF — Paper is fed from the External Large Capacity Feeder (optional). This cannot be selected if the
External Large Capacity Feeder (optional) is not installed.
y Large Capacity Feeder (optional) is not available for some countries or regions.
y The selectable values vary depending on the optional devices installed on this equipment and their
configuration on the [Configuration] tab.
y When the paper size settings on the [Configuration] tab differ from the paper size settings in the equipment, the
paper source setting is ignored and the equipment may prompt to set the paper in the bypass tray.
5) Paper Type
This sets the media type of the paper.
- Plain(Auto) — Select this when printing on 17-28 lbs plain paper (64-105 g/m
2
plain paper).
- Recycled — Select this when printing on the recycled paper.
- Thick1 — Select this when printing on 32-90 lbs thick paper (106-163 g/m
2
thick paper).
- Thick2 — Select this when printing on 90-110 lbs thick paper (164-209 g/m
2
thick paper).
- Thick3 — Select this when printing on 110-130 lbs thick paper (210-256 g/m
2
thick paper).
- Thick4 — Select this when printing on the front side of 110-130 lbs thick paper (257-300 g/m
2
thick paper).
- Special 1 — Select this when printing on the special 1 paper.
- Special 2 — Select this when printing on the special 2 paper.
- Transparency — Select this when printing on transparent sheets.
- Plain1 — Select this when printing on 17-20 lbs plain paper (64-80 g/m
2
plain paper).
- Plain2 — Select this when printing on 21-28 lbs plain paper (81-105 g/m
2
plain paper).
- Thick1 (Back) — Select this when printing on the back side of 32-90 lbs thick paper (106-163 g/m
2
thick paper).
- Thick2 (Back) — Select this when printing on the back side of 90-110 lbs thick paper (164-209 g/m
2
thick paper).
- Thick3 (Back) — Select this when printing on the back side of 110-130 lbs thick paper (210-256 g/m
2
thick paper).
- Thick4 (Back) — Select this when printing on the back side of 110-130 lbs thick paper (257-300 g/m
2
thick paper).
- Special 1 (Back) — Select this when printing on the back side of the special 1 paper.
- Special 2 (Back) — Select this when printing on the back side of the special 2 paper.
When [A4 Tab] or [Letter Tab] is selected at the [Print Paper Size] box, [Tab] will be displayed and you cannot
change the paper type.
For more information about the paper types that are available for this equipment, refer to the Quick Start Guide .