Toshiba e-STUDIO 4500c, Service Manual

Page: 559 / 1120

April, 2007 SERVICE PROGRAM TABLES
5-67
2778 TEdge Cor:Sp1 FC – PTR Trailing Edge Correction for Special Paper 1: FC
Sets the strength of the bias coefficient for the bias applied at the trailing edge when
the image is transferred from ITB to paper. Applied when printing in full-color mode
on Special Paper 1.
007 Side1:PTR [0~400/5%]
012 Side2:PTR
2779 TEdge SWT:Sp1 FC –
PTR
Switch Timing for Special Paper 1: FC
Sets the switch timing that determines the distance from the leading edge where the
SP2778 settings are applied during image transfer from ITB to paper. Applied only
when printing in full-color mode on Special Paper 1.
[-100~0/1 mm]
2781 Sp1:K:LL Special Paper 1: K Low
2782 Sp1:K:ML Special Paper 1: K Medium Low
2783 Sp1:K:MM Special Paper 1: K Medium
These SPs set the paper size correction coefficient for the image to paper transfer
bias threshold values calculated based on the reading of the absolute humidity from
the temperature/humidity sensor and the thresholds set with SP2304.
SP2781 – Up to SP2304 001: Threshold 1
SP2782 – More than SP2304 001 Threshold 1, up to SP2304 002 Threshold 2.
SP2783 – More than SP2304 002 Threshold 2, up to SP2304 003 Threshold 3.
SP2784 – More than SP2304 003 Threshold 3, up to SP2304 004 Threshold 4.
SP2785 – More than SP2304 004 Threshold 4
These settings apply only to the image area printed on Special Paper 1 in black-and-
white mode.
2781 2782 2783
007 Side1:PTR [10~250/5%] [10~250/5%] [10~250/5%]
008 Side1:SepDC
009 Side1:SepAC
012 Side2:PTR [10~250/5%]
013 Side2:SepDC [10~250/5%]
014 Side2:SepAC
2784 Sp1:K:MH Special Paper 1: K Medium High
2785 Sp1:K:HH Special Paper 1: K High
2784 2785
007 Side1:PTR [10~250/5%] [10~250/5%]
008 Side1:SepDC [10~250/5%]
009 Side1:SepAC [10~250/5%] [10~250/5%]
012 Side2:PTR [10~250/5%] [10~250/5%]
013 Side2:SepDC
014 Side2:SepAC