SERVICE PROGRAM TABLES
August, 2006
5-164
ADF Org Feeds
[0~9999999/ 1]
8 221
These SPs count the number of pages fed through the ADF for
front and back side scanning.
8 221 1
Front
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously,
the Front side count is the same as the number of pages
fed for either simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously,
the Front side count is the same as the number of pages
fed for duplex front side scanning. (The front side is
determined by which side the user loads face up.)
8 221 2
Back
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously,
the Back count is the same as the number of pages fed
for duplex scanning.
With an ADF that cannot scan both sides simultaneously,
the Back count is the same as the number of pages fed
for duplex rear-side scanning.
•
When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count
is 1.
•
If a jam occurs during the job, recovery processing is not counted to avoid double
counting. Also, the pages are not counted if the jam occurs before the first sheet
is output.
Scan PGS/Mode
[0~9999999/ 1]
8 231
These SPs count the number of pages scanned by each ADF mode
to determine the work load on the ADF.
8 231 1
Large Volume
Selectable. Large copy jobs that cannot be
loaded in the ADF at one time.
8 231 2
SADF
Selectable. Feeding pages one by one
through the ADF.
8 231 3
Mixed Size
Selectable. Select “Mixed Sizes” on the
operation panel.
8 231 4
Custom Size
Selectable. Originals of non-standard size.
8 231 5
Platen
Book mode. Raising the ADF and placing the
original directly on the platen.
•
If the scan mode is changed during the job, for example, if the user switches
from ADF to Platen mode, the count is done for the last selected mode.
•
If the user selects “Mixed Sizes” for copying in the platen mode, the Mixed Size
count is enabled.
•
In the SADF mode if the user copies 1 page in platen mode and then copies 2
pages with SADF, the Platen count is 1 and the SADF count is 3.
Summary of Contents for e-STUDIO 4500c
