manualshive.com logo in svg

Toshiba e-STUDIO 230L, Printing Manual, Page: 69 / 382

Share
Download
Toshiba e-STUDIO 230L Printing Manual Download Page 69

Printing Guide — Installing Client Software for Windows

69

8.

Make sure the created LPR port is checked in the “Print to the 
following port” list and click [OK] to save settings.

NOTE:

•

Before using the printer driver for printing, please configure the installed options of
the equipment and department code (if required) on the printer driver.

 

 P.204 "Before Using the Printer Driver"

— Windows 2000/XP/Server 2003

Configuring the LPR port for Windows 2000/XP/Server 2003

The following describes an installation on Windows 2000.  The procedure is the same when
Windows XP or Windows Server 2003 is used.

1.

Install the client software using the installer in the Client1 
CD-ROM.

•

Please install the client software following the instruction of the instal-
lation for parallel printing.

 

 P.25 "Installation for Parallel Printing Using the Installer"

2.

After installing the client software, click [Start], select [Set-
tings], and click [Printers] to open the Printers folder.

Summary of Contents for e-STUDIO 230L































































































































































































































































































































































































Reviews:

No comments