manualshive.com logo in svg

Toshiba e-STUDIO 230L, Printing Manual, Page: 103 / 382

Share
Download
Toshiba e-STUDIO 230L Printing Manual Download Page 103

Printing Guide — Installing Client Software for Windows

103

6.

Make sure a test page is printed successfully and click [Yes] 
to close the dialog box.

7.

The printer driver is installed and the print queue window 
appears.

NOTE:

•

Before using the printer driver for printing, please configure the installed options of
the equipment and department code (if required) on the printer driver.

 

 P.204 "Before Using the Printer Driver"

— Windows NT 4.0/2000/XP/Server 2003

Installing the printer drivers for SMB printing by Point and Print

REQUIREMENT:

•

You must log into Windows as a user who has the “Administrators” or “Power Users”
privilege when using Windows NT 4.0, Windows 2000, Windows XP, or Windows
Server 2003.

1.

Open this equipment in the network with Windows Explorer, 
and double-click a queue in which the printer driver should 
be installed (see below).

pcl5c

 — Double-click this queue to install the PCL5c printer driver.

Summary of Contents for e-STUDIO 230L































































































































































































































































































































































































Reviews:

No comments