Toshiba E studio 2010C, Quick Start Manual

Page: 67 / 84

6
Options
65
Other options available are as follows. Contact your service technician or representative for details.
Work Table (KK-4550)
This is a small table for placing originals while the equipment is
being operated.
Installed on the right-hand side of the equipment.
FAX Unit (GD-10)
This is a unit for using the equipment as a Fax machine.
Installed in the rear side of the equipment.
nd Line for FAX Unit (GD-160)
This unit enables you to add a line to the Fax, making a 2nd line
available.
Installed inside of the equipment.
The FAX Unit is required.
Desk (MH-050)
This is a desk for the equipment.
Accessible Arm (KK-550)
This enables a user in a wheelchair to close the Reversing
Automatic Document Feeder while emaining seated.
& P.66 “How to use the Accessible Arm” in this manual
Operator’s Manual Pocket (KK-1660)
Keep the manual in this pocket.
Wireless LAN Module (GN-1060)
This module enables the equipment to be used in a wireless LAN
environment.
Installed inside of the equipment.
The Antenna is required.
The equipment cannot be connected to the wireless and wired
LAN at the same time.
Antenna (GN-010)
This is used when the Wireless LAN Module is installed.
•
•
•
•
•
e-BRIDGE ID Gate (KP-004/KP-005)
You can log in and use the equipment simply by holding the IC
card over the e-BRIDGE ID Gate.
Installed on the right-hand side of the equipment.
This cannot be installed with the Work Table at the same time.
Data Overwrite Enabler (GP-1070)
This is an enabler to erase the data stored temporarily when
copying, printing, scanning, faxing, Internet Fax or network Fax
is performed. It overwrites temporarily stored data with random
data.
IPsec Enabler (GP-1080)
This enables the IPsec function in this equipment.
Hardcopy Security Kit (GP-1190)
This enables Hardcopy Security Printing and you can track the
security pattern information.
Meta Scan Enabler (GS-1010)
This enables the Meta Scan function in this equipment.
External Interface Enabler (GS-100)
This enables the EWB function in this equipment.
Unicode Font Enabler (GS-1007)
This enables printing from the SAP environment using Unicode
font with this equipment.
Front USB Cable (GR-1140)
This enables to connect a USB media in this equipment.
Hard Disk Kit (GE-10)
This enables to store the data,etc.
•
•
Depending on the model, options have been already installed and the functions can be used.
The following options are exclusive for e-STUDIO2050C/2550C:
- Wireless LAN Module (GN-1060)
- Antenna (GN-3010)
- Data Overwrite Enabler (GP-1070)
- IPsec Enabler (GP-1080)
- Hardcopy Security Kit (GP-1190)
- Meta Scan Enabler (GS-1010)
- External Interface Enabler (GS-1020)
- Unicode Font Enabler (GS-1007)
- Front USB Cable (GR-1140)
- Hard Disk Kit (GE-1220)