Toshiba E-Studio 2007, Fax Manual

Page: 27 / 126

2.SENDING A FAX
Basic Procedures 25
2 SENDING A FAX
2
Align the original against the left inner corner of the glass.
 Different size originals can also be sent in one transmission.
The original size is the size that you have set initially. When sending an original of a
size larger than the set size, make sure that all contents are scanned and no
portions are left out.
 When an original is placed in the direction shown in the figure on the left:
The original is transmitted so that the pre-entered sender information is printed in
position A in the figure.
 When an original is placed in the direction shown in the figure on the right:
The original is transmitted so that the pre-entered sender information is printed in
position B in the figure if the size of the original is LT/A4, and in position A in the
figure if the size is other than LT/A4.

The pre-entered sender information shows what is registered in the Terminal ID.
 P.103 “Registering the Terminal ID”
3
Lower the Original Cover, ADF, or RADF slowly.
e-STUDIO2505F
e-STUDIO2507 Series
A
B
A
A B
A