Toshiba e-STUDIO 165, Printing Manual, Page: 194 / 256

3 PRINTING
194 Printing from Windows
3
To print or insert a back cover, check the “Use Back Cover” box
and set the “Source”, “Print Style” and “Paper Type” options that
you require.
y Print Style
This selects how you want to print a back cover.
-
Do not print on page — Select this to insert a blank cover.
- Print on 1 side of page — Select this to print the last page image on the front
side of a cover.
- Print on both sides of page — Select this to print the last two page images on
both sides of a cover.
y Paper Type
This sets the media type of the paper.
-
Plain — Select this when printing on 20 lbs plain paper (64-80 g/m
2
plain paper).
- Thick1 — Select this when printing on 24-28 lbs thick paper (81-105 g/m
2
thick
paper).
- Thick2 — Select this when printing on 32-90 lbs thick paper (106-163 g/m
2
thick
paper).
- Transparency — Select this when printing on transparent sheets.
y
When “Automatic” is selected in the “Source” drop down box, the paper is automati-
cally selected according to the printed document size.
y
“Print on both sides of page” is available only when 2-Sided printing is enabled at the
Setup tab.
y The same paper type applies to both front cover and back cover. When the paper
type for either cover is changed, the paper type for other cover is automatically set to
the same one.
4
Set other print options you require and click [OK].
5
Click [OK] or [Print] to send a print job.
A front cover and back cover are printed or inserted for output.
— Printing booklets
Printing in normal booklet mode produces a document that, when folded, becomes a properly
paginated booklet or magazine-style publication.
For example, if you create a document on letter-size paper (8½ x 11 inches) and then print in
booklet mode, the yield is a 5½-x-8½-inch booklet. Each page has been scaled to fit on half a
sheet and reordered so that the booklet is properly paginated when folded.
To retain your original document size when printing booklets, select the booklet size same as
your original document size. Then, your 8½-inch document is printed on ledger size paper (11 x
17 inches) and reordered so that, when folded, the yield is an 8½-x-11-inch booklet. You can
select from the following page-size options when printing a tiled booklet:
y Letter Booklet on Ledger
y A4 Booklet on A3
y B5 Booklet on B4