manualshive.com logo in svg

Toshiba e-STUDIO 165, Printing Manual, Page: 111 / 256

Share
Download
Toshiba e-STUDIO 165 Printing Manual Download Page 111

Installing Client Software for Macintosh    111

Installing Client Software for Macintosh

Please refer to following instructions for configuring printing systems on Macintosh computers.

 

 P.111 “About client software for Macintosh”

 

 P.111 “Planning for installation”

 

 P.112 “Installing the printer on Mac OS 8.6/9.x”

 

 P.118 “Installing the printer on Mac OS X 10.2.4 to Mac OS X 10.4.x”

About client software for Macintosh

PostScript Printer Description file

The Macintosh PPD (PostScript Printer Description) file contains information about controller-
specific features.  There are two PPD files provided in the Client Utilities CD-ROM: one is for 
Mac OS 8.6/9.x and the other is for Mac OS X.
Information within the PPD file for Mac OS 8.6/9.x works in conjunction with the standard Macin-
tosh LaserWriter 8 printer driver version 8.6.5 (or later).  This Macintosh PPDs are supplied for 
Mac OS 8.6 to 9.x and it also supports Mac OS X 10.1/10.2 Classic mode.
Information within the PPD file for Mac OS X works in conjunction with the Print Center on Mac 
OS X 10.2.4 to Mac OS X 10.4.x.

Planning for installation

System requirements

To install the printer drivers on a Mac OS computer, the following environment is required.
Display Resolution: 1028 x 768 dots or more
OS: 

Mac OS 8.6 to 9.x, Mac OS X 10.1 (Classic), Mac OS X 10.2 (Classic)
Mac OS X 10.2.4 to Mac OS X 10.4.x

Protocol:

TCP/IP, AppleTalk (Ethernet), Bonjour

Printer Driver:

LaserWriter 8 printer driver version 8.6.5 or later
(not required for Mac OS X)

Mac OS X 10.2 and its earlier versions of Mac OS X are supported in Classic mode using the 
PPD file for Mac OS 8.6 to 9.x.  This equipment also provides the PPD file for Mac OS X 10.2.4 
to Mac OS X 10.4.x.

Summary of Contents for e-STUDIO 165

































































































































































































































































Reviews:

No comments