User’s Manual
EN-23
dynadock
TM
WiAC
Configuring audio recording ports (Microphone)
1. Right-click the speaker icon in the Notification Area of your Windows
®
desktop.
2. Select
Recording Devices
from the menu.
3. On the
Recording
tab of the dialog box, select one of the following:
■
A
Realtek High Definition Audio
device—to use the Microphone
jack or headphone/microphone combo jack of the docked computer
■
A
dynadock
Audio
device—to use the headphone/microphone
combo jack of the dynadock
4. Click
Set Default
.
5. Click
OK
.
6. Connect your recording device to the jack you enabled in step 3.
Configuring Video Ports
Connection
The dynadock provides the following video ports:
HDMI
– for connection to HDMI (using the HDMI cable which is not
provided) interface monitors. (up to 2560 x 1440 pixels)
DisplayPort
– for connection to DisplayPort (using the DisplayPort
cable which is not provided) interface monitors. (up to 2560 x 1600
pixels)
Connect the monitor cable (not provided) to the video output port on the
dynadock and the external monitor. This cable can be connected and
disconnected any time without disconnecting the dynadock from your
computer.
You can customize the video settings of the dynadock. See section for more
information.
Viewable screens
The dynadock video drivers give you the option of viewing a total of four
screens:
■
the screen on the computer
■
an external monitor connected to the video port on the computer (if
available)
■
two external monitors connected to the dynadock
■
The icon (
) appears in the system tray after connecting an external
display to the dynadock.
■
When using the DisplayPort and the HDMI out port simultaneously, the
resolution is up to 2048 x 1152 pixels.