34
EN
5
Select the digital (DVB) / analogue (ATV) mode
or external input (AV1/AV2) using [
K
\
L
], then
press [
B
].
6
Select the channel number to record using
[
K
\
L
], then press [
B
].
7
Select the recording media (“DVD” or “VCR”)
using [
K
\
L
], then press [
B
].
8
Select the recording mode using [
K
\
L
], then
press [
B
].
Refer to “Recording Mode” on page 28 for DVD or page
70 for VCR.
Select “STTL” to “ON” or “OFF” using [
K
\
L
].
If you set “STTL” to “ON”, subtitle will be recorded too.
• When analogue channel is selected, “PDC” will be
displayed instead of “STTL”.
Select “PDC” to “ON” or “OFF” using [
K
\
L
].
Refer to “PDC (Programme Delivery Control)” on this
page.
• When DVB channel is selected, “STTL” will be displayed
instead of “PDC”.
10
Press [ENTER
\
OK] when all information
required is entered.
Your programme setting is stored.
• To set another programme, repeat the steps
2
to
10
.
• To exit, press
[TIMER PROG.]
.
• When 2 or more programmes are overlapped, “Timer
programme overlapped” appears, and the overlapped
programme will be displayed in blue. To correct the timer
programme, refer to “Checking, Cancelling or Correcting
the Timer Programming Information” on page 35.
11
Press [TIMER SET].
The
icon will appear on the front panel display and the
unit enters to the timer-standby mode.
Note
• If you have not set the clock, the clock setting window will
appear instead of the Timer Programming list. Continue
from “Clock Setting” on page 67 before programming the
timer.
• Use
[
{
\
B
]
to move the cursor to the left and the right in
the entry screen for the timer programming.
• If a basic recording or One-touch Timer Recording is in
progress on one component (e.g. VCR) and the timer
recording set for the other component (e.g. DVD) is about to
begin, the unit automatically switches to the programmed
channel for timer recording 2 minutes before the
programmed starting time, and the recording in progress (for
VCR) will be cancelled UNLESS their recording channels
are the same. If their recording channels are the same, the
timer recording will start without cancelling the recording
currently in progress. In this case, the recording of the same
channel will be made on both DVD and VCR.
• Cancel the timer-standby mode by pressing
[TIMER SET]
before operation for either DVD or VCR. When finished
operating, press
[TIMER SET]
to resume the timer-standby
mode.
• In the timer-standby mode, you can turn on the power and
use the component (VCR or DVD) which is not currently
timer-programmed.
The Programme Delivery Control (PDC) assures that the TV
programmes you have programmed for timer recording are
recorded exactly from beginning to end, even if the actual
broadcasting time differs from the scheduled time due to a
delayed start or extension of the programme duration.
Furthermore, if a programme is interrupted, the recording will
also be interrupted automatically and resumed when the
programme starts again.
If the PDC signal drops out because the broadcast signal is
weak, or if a broadcasting station does not transmit a regular
PDC signal, the timer recording is performed in normal mode
(without PDC) even if it was programmed for PDC. If the
starting time of the PDC timer recording is between 0:00 and
3:59 on a given day, the PDC function will operate from 20:00
on the previous day to 4:00 on the next day. If the starting time
of the PDC timer recording is between 4:00 and 23:59 on a
given day, the PDC function will operate from 0:00 on the
given day to 4:00 on the next day. This means that if the
relevant programme is broadcasted within this period, it is
recorded correctly. If the timer is not programmed correctly,
the incorrect timer setting stays in effect unless you cancel it.
To cancel an incorrect timer setting, refer to “Checking,
Cancelling or Correcting the Timer Programming Information”
on page 35.
Note
• This feature is only available for analogue channels.
• If DVB channels have been stored in this unit, you cannot
select PDC on.
9
For DVB channel recording:
For analogue channel recording:
1/1
03/12
0:00
06/12
07/12
07/12
7:00
9:00
17:00
9:00
9:30
18:00
DVB 18
DVB 190
1 TF1
STTL
PDC
Timer Programming
Date
Start
End
CH
New Programme
THU
PDC (Programme Delivery Control)
E9TK1BD_EN.book Page 34 Thursday, April 23, 2009 9:23 AM
