Toshiba DP120F Operator'S Manual Download Page 2

Page: 2 / 295

The United States Environmental Protection Agency (EPA) has introduced a voluntary program, the

NERGY

TAR Program, to encourage the widespread and voluntary use of energy-efficient technologies that enhance

the workplace, improve product performance, prevent pollution, and reduce your energy costs. As an

NERGY

TAR Partner, Toshiba has determined that this facsimile model meets the

NERGY

TAR

guidelines for energy efficiency.

NERGY

TAR guidelines require that all

NERGY

TAR facsimiles

maintain very low power consumption during idle state or have a

Power Saver

feature that will automatically

stand-down to an idle state after a period of inactivity.

For more information on the

NERGY

TAR Program, please contact:

NERGY

TAR Printers/Fax Machines

US EPA (6202J)

Washington, DC 20460

EPA

NERGY

TAR

NERGY

TAR is a U.S. registered mark.

Summary of Contents for DP120F







































































































































































































































































































Search results

Summary of Contents for DP120F

Reviews:

Related manuals for DP120F

Brands by name

Popular brands

Toshiba DP120F, Operator'S Manual

Search results

Summary of Contents for DP120F

Reviews:

Related manuals for DP120F

Brands by name

Popular brands