background image

English

6

6

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.

media recorder

decoder*

CABLE HOLDER

FIXING STRAP

HDMI™ INPUT SOCKETS

SCART 2 (EXT2)

COMPONENT

VIDEO (EXT3)

SCART 1 (EXT1)

*

a decoder could

be Digital Satellite

or any other

compatible decoder

.

IN/OUT

MEDIA REC.

TV

SAT

Aerial cables:

Connect the aerial to the socket on the rear of the

television. If you use a decoder* and/or a media recorder

it is essential that the aerial cable is connected through

the decoder and/or through the media recorder to the

television. 

SCART leads:

Connect the video recorder 

IN/OUT

socket to the

television. Connect the decoder 

TV

socket to the

television. Connect the media recorder 

SAT

socket to the

decoder 

MEDIA REC. 

socket.

Before running 

Auto tuning

put your decoder and media

recorder to

Standby

.

The phono sockets alongside the COMPONENT VIDEO

INPUT sockets will accept L and R audio signals.

In addition there is a fixed/variable external audio ouput

which enables the connection to a suitable Hi-Fi unit,

make sure the 

Speaker

option in the 

Sound

menu is set

of 

Off

. The variable option is altered by using the sound

controls.

HDMI™ (High-Definition Multimedia Interface) is for use

with a DVD, decoder or electrical equipment with digital

audio and video output.  

It is designed for best performance with 1080i high-

definition video signals but will also accept and display

480i, 480p, 576i, 576p and 720p signals.

PLEASE NOTE:

Although this television is able to connect

to HDMI equipment it is possible that some equipment

may not operate correctly.  

A wide variety of external equipment can be

connected to the back of the television, therefore

the relevant owners manuals for 

all

additional

equipment 

must

be referred to. 

We recommend 

SCART 1

for a decoder and 

SCART 2

for

a media recorder.   

If connecting S-VIDEO equipment, set the 

INPUT

for

EXT2

See page 22.

If the television automatically switches over to monitor

external equipment, return to normal television by

pressing the desired programme position button. To

recall external equipment, press 

B

to select between

EXT1

EXT2

EXT3 (C)

HDMI1

HDMI2

or 

PC

.

The cable holder can be used for aerial, media recorder

and audio cables. Do not use the cable holder as a

handle and make sure all cables are removed before

moving the television.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing, LLC.

g

Summary of Contents for DL66/67 Series






























Reviews: