5. PRINTER SETUP
ENGLISH VERSION
5.9 Parameter Setting In Menu Mode
E5-30
5.9.5 CATEGORY “PRINTER TEST MODE”
User can select printer configuration function menu in this category.
(*: Default setting of the function)
Function
List of Menu
Description
Test Mode
Configuration
Paper Type
Black Mark
Document Length
Label*
Perforation
Select a type of paper.
This setting is used in Printer Test
modes.
Refer to the chapter “Paper Type
Control”
Form Length
XXX/203 inch
XXX: 560-1260*-
4434
Set Label length in n/203 inch.
This length is used for the label
length in Label mode.
Set Document length in n/203
inch. This length is used for the
page length in Document Length
mode.
This setting is used in Printer Test
modes.
Refer to the chapter “Label Mode”
and “Document Length Mode”
Paper Width
58mm
80mm
4inch*
5.1inch
Set a type of the paper width. This
width is used for Test modes and
Print Printer Configuration.
This setting is used
in Printer
Test modes.
It is selectable print test functions in this category. Refer to the following table.
This category performs printing tests.
Function Description
Rolling ASCII
Simplex
It performs Rolling ASCII print on 1ST side.
Refer to the Chapter “Rolling ASCII print test”
H Print Test
Simplex
It performs H print on 1ST side.
Refer to the Chapter “H print test”
Dot Check Test
Simplex
It performs Dot Check print on 1ST side.
Refer to the Chapter “Dot check pattern print test”
Graphics Test
Simplex
It performs Graphics print on 1ST side.
Refer to the Chapter “Graphics print test”
Rolling ASCII
Duplex
It performs Rolling ASCII print on 1ST and 2ST sides both.
Refer to the Chapter “Rolling ASCII print test”
H Print Test
Duplex
It performs H print on 1ST and 2ST sides both.
Refer to the Chapter “H print test”
Dot Check Test
Duplex
It performs Dot Check print on 1ST and 2ST sides both.
Refer to the Chapter “Dot check pattern print test”
Graphics Test
Duplex
It performs Graphics print on 1ST and 2ST sides both.
Refer to the Chapter “Graphics print test”
