Toshiba DB-EA4D, Owner'S Manual

Page: 22 / 80

4. BASIC FUNCTIONS OF OPERATION PANEL
ENGLISH VERSION
4.2 Keys On The Normal Mode
E4-3
4.2.3 FEED KEY
This key feeds or loads paper.
This key is not activated during the printer is in an ERROR state and processing mechanical activities.

Press [
FEED
] Key when Document Length Mode is selected and paper is loaded, the printer
feeds paper.

Press [
FEED
] Key when Label Mode is selected and paper is loaded,
When Rotary cut is set to “OFF”,
- If paper is present at TOF (stand by) position, Paper is fed to next Label TOF position.
- If paper is present at Manual cut position, Paper is fed to next Manual cut position.
- If paper is present at other position (e.g. just printing is done), Paper is fed to next
Manual cut position.
When Rotary cut is set to not “OFF”,
- Paper is fed to Label TOF position.

Press FEED Key when Black Mark Mode is selected and paper is loaded,
When Rotary cut is set to “OFF”,
- If paper is present at TOF (stand by) position, Paper is fed to next BM TOF position.
- If paper is present at Manual cut position, Paper is fed to next Manual cut position.
- If paper is present at other position (e.g. just printing is done), Paper is fed to next
Manual cut position.
When Rotary cut is set to not “OFF”,
- Paper is fed to BM TOF position.

Press FEED Key when Perforation Mode is selected and paper is loaded,
When Rotary cut is set to “OFF”,
- If paper is present at TOF (stand by) position, Paper is fed to next Perforation TOF
position.
- If paper is present at Manual cut position, Paper is fed to next Manual cut position.
- If paper is present at other position (e.g. just printing is done), Paper is fed to next
Manual cut position.
When Rotary cut is set to not “OFF”,
- Paper is fed to Perforation TOF position.

Press [
FEED
] Key when Cut Sheet Mode is selected and paper is loaded, the printer feeds paper
to eject.

In case of Paper Load setting is Manual and no paper is set in the printer, press [
FEED
] Key
after paper is set manually and PE sensor detects paper. Then the printer loads paper to TOF
position in each mode.

Press [
FEED
] Key when “PARK” is displayed on the LCD, the printer loads paper.