Toshiba D-R150SB, Owner'S Manual

Page: 24 / 48

24
Basic Setup
A: Initial settings
This step sets the recorder’s clock and tuner to record broadcasting TV programmes.
If there are discrepancies in the recorder’s time display or changes made to receivable TV stations, you
should make this setting again.
Notes
• To go back to the previous menu, press button.
• To exit the menu, press EASY NAVI button twice.
• If you exit the “Initial settings” menu when the clock and channels are not set, a menu may automatically appear to remind
you to set them each time you turn on the recorder. Once you complete this process, the menu reminder will not appear
again.
• When the power goes down or the power cord is unplugged, the clock data, channel data and timer programmes may be
deleted. In this case, set up these items again.
1 2 3
4 5 6
+10
7 8 9
0
CLEAR
DVD TV
ENTER
OPEN/CLOSE
TIME SLIP
TV VOL CH
T.SEARCH PROGRESSIVE
INPUT SEL.
TOP MENU MENU
STOP
PA
USE
PLAY
SKIP FWD SKIP REV
ADJUST
QUICK CHP DIVIDE
DISPLAY SUBTITLE
REC REC MODE ZOOM ANGLE
TV/DVR AUDIO
INSTANT
REPLAY
INSTANT
SKIP
EASY
NA
VI
ON/STANDBY
FWD REV
1
If the setup menu is not displayed, press EASY NAVI and
select “Setup” using / / / , then press ENTER to
display the menu.
2
Press / to select “Initial settings”, then
press ENTER.
3
Press / to select the setting to be adjusted,
then press ENTER.
The submenu appears.
e.g. When “Time & date setting” is selected:
When the recorder is operated for the first time, input
settings in the following order.
1: Time & date setting page 26
2: Channel setting page 29
3: Just clock setting page 35
Clock set position setting
4: Input signal setting page 37
5: AV1 output setting page 38
6: AV2 input setting page 39
SETUP
e.g.
Input signal
AV1 output
Channel setting
PAL
Video
Video
1
On
Auto
Initial settings
Clock set position
Just clock
AV2 input
Time & date setting Auto
SETUP
e.g.
Input signal
AV1 output
Channel setting
PAL
Video
Video
1
On
Auto
Initial settings
Clock set position
Just clock
AV2 input
Time & date setting
Auto
Auto
Manual
Start
• If you display the setup menu when the output signal is progressive, it
automatically changes to interlace. Press PROGRESSIVE again after you exit
the menu.
page 17
ENTER
ENTER
04_D-R150SB(E)_inst_21-33 05.7.13, 0:23 AM 24