Toshiba CV50* ANALOGUE Series Owner'S Manual Download Page 33

Page: 33 / 64

CONTROLS AND FEATURES

The Common Interface Slot, situated on the back of the

television, enables the insertion of a CAM (Conditional Access

Module) and card. These are purchased from a service provider

and allow additional subscription broadcasts to be viewed. For

information see a service provider.

Insert the CAM and card into the Common Interface
Slot, following the instructions provided with the CAM.
A box will appear on screen to confirm that the CAM is
loaded.

In the

FEATURE MENU

press

to select

Common Interface Slot

Details of the CAM should now be available. Use

to select it.

Digital settings – software
upgrade

This feature can be used to check the version of software

currently installed.

From the

FEATURE MENU

press

to select

Software Upgrade

. Press

Press

to select

Version

. Use

to select.

When the software has been updated there will be a
choice of two versions available.

Auto upgrade

is selected the software will automatically

update as each version becomes available, provided the

television is on or in standby. If the television is on, a screen

prompt will appear showing the software download taking

place.

In the

SOFTWARE UPGRADE

menu press

select

Auto upgrade

Use

to select

OFF

If preferred, software upgrades can be searched for manually

using

Search for New Software

In the

SOFTWARE UPGRADE

menu press

select

Search for New Software

Press

. The television will automatically start

searching for a software upgrade, the progress bar will
move along the line.

If an upgrade is found the television will automatically
start downloading, if not a screen will appear stating
that an upgrade is unavailable.

Common interface

Version

MENU EXIT

FEATURE MENU

Favourite and Locked Programmes

Favourites

ALL PROGS

Common Interface Slot

NO MODULE

Software Upgrade

Encrypted Programmes

OFF

Back Watch

3.2

MENU EXIT

SOFTWARE UPGRADE

Version

Auto upgrade

Search for New Software

Back Watch

Auto Upgrade

Searching for new software

3.2

MENU EXIT

SOFTWARE UPGRADE

Version

Auto upgrade

OFF

Search for New Software

Back Watch

EXIT

SEARCHING FOR NEW SOFTWARE

Searching for a new software upgrade for

this TV.

Searching

Stop

NO UPGRADE AVAILABLE

There is no upgrade available at

this time.

Continue

00GB_CV505D_EngOM.book Page 33 Thursday, February 7, 2008 3:10 PM

Summary of Contents for CV50* ANALOGUE Series

































































Search results

Summary of Contents for CV50* ANALOGUE Series

Reviews:

Related manuals for CV50* ANALOGUE Series

Brands by name

Popular brands

Toshiba CV50* ANALOGUE Series, Owner'S Manual

Search results

Summary of Contents for CV50* ANALOGUE Series

Reviews:

Related manuals for CV50* ANALOGUE Series

Brands by name

Popular brands