17
D4222901B
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
www.toshiba-teli.co.jp
6.10 Machine external specification
Dimensions
29 mm(W) * 29 mm (H) * 16 mm (D) (Not including protrusion)
Mass
approx. 32g
Lens mount
C-mount
Flange back
17.526mm
Camera body grounding
insulation status
Non-Conductive between circuit GND and camera body
6.11 Operation Ambient conditions
Operation assurance
Temperature: 0°C to +40 °C, Camera housing temperature: less than 50 °C
Humidity: 10% to 90% (no condensation)
Storage assurance
Temperature : -20 to +60 Celsius
Humidity : +90% or less (no condensation)
EMC condition
EMI (Electro-Magnetic interference) : EN61000-6-4,
FCC Part 15 Subpart B Class A
EMS (Electro-Magnetic susceptibility) : EN61000-6-2
Notes on Heat Dissipation:
- The temperature of camera housing must be kept less than 50 Celsius.
Please provide sufficient heat dissipation depending on your installation.
Notes on Conformity of the EMC:
The adaptability of the safety standard of this camera is assured in the condition of combination with the following parts:
- USB Cable
USB3C-A/1-CS/1-C-0
(COMOSS Electronic Co., Ltd.)
- e-CON Cable
3.0m, Shield cable
(Fabricated parts)
Parts:
- e-CON connector
XN2A-1470
(OMRON Corporation)
- Shielded wire
UL1533 (AWG28)
(Hitachi Cable, Ltd.)
Connection:
Please confirm the EMC adaptability when it combines with parts other than them.