background image

BN interface

Installation Manual

3-

EN

Precautions for safety

• Carefully read these "Precautions for Safety" before installation, and perform installation work safely.
• These precautions contain important information regarding safety.
• After installation work, carry out an operation trial to confirm that there are no problems, and explain to the customer how to 

operate and maintain the system. Ask the customer to keep this Installation Manual.

Expressions

Graphic symbols

Warning

Text set off in this manner indicates that failure to adhere to the directions in the warning could result 
in serious bodily harm (*

1

) or loss of life if the product is handled improperly.

Caution

Text set off in this manner indicates that failure to adhere to the directions in the caution could result 
in serious bodily injury (*

2

) or

 

damage (*

3

) to property if the product is handled improperly.

*1: Serious bodily harm indicates loss of eyesight, injury, burns, electric shock, bone fracture, poisoning, and other injuries which 

leave aftereffect and require hospitalization or long-term treatment as an outpatient.

*2: Bodily injury indicates injury, burns, electric shock, and other injuries which do not require hospitalization or long-term treatment 

as an outpatient.

*3: Damage to property indicates damage extending to buildings, household effects, domestic livestock, and pets.

" " indicates prohibited items.
The actual contents of the prohibition are indicated by a picture or text placed inside or next to the 
graphic symbol.

" " indicates compulsory (mandatory) items.
The actual contents of the obligation are indicated by a picture or text placed inside or next to the 
graphic symbol.

 Warning

• Installation and reinstallation should be performed by your dealer or a qualified 

electrician

Attempting to carry out installation work on your own, and doing so incorrectly, may result in 
electric shock or fire.

• Electrical work must be performed by a qualified electrician in accordance with 

this Installation Manual. The work must satisfy all local, national and international 
regulations

Inappropriate work may result in electric shock or fire.

• Be sure to turn off the power before starting work

Failure to do so may result in electric shock.

• Use only the power adapter supplied with this unit

A power adapter other than that supplied with this unit may provide a different voltage and have 
different polarity (+) (

), which could lead to fire, explosion or generation of heat.

• Do not modify the unit

Doing so may result in excessive heat or fire.

The following instructions 
must be observed.

Prohibited

Compulsory

Warning

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may 
be required to take adequate measures.

Summary of Contents for BMS-IFBN640TLE















Reviews: