17
Using the Remote Control
Installing the batteries
Install the batteries (AAAx2), matching the polarity indicated inside battery compartment
of the remote control.
1
Slide the battery cover down.
(Sample Illustration) Remote control - Opening the battery cover
2
Insert two AAA batteries.
Make sure to match the polarity marks (+/ ) on the batteries to the marks indicated in the
battery compartment.
(Sample Illustration) Remote control - inserting the batteries
3
Replace the battery cover.
Do not expose batteries to excessive heat such as sunshine, fire, etc.
Using the remote control
Dispose of batteries in a designated disposal area.
Always consider the environment when disposing of batteries.
Always follow applicable laws and regulations.
If the remote does not operate correctly, or if the operating range is reduced, replace the
batteries.
Always replace both batteries with new ones. Never mix battery types or use new and used
batteries together.
Always remove batteries from the remote if they are dead or if the remote control is not to
be used for an extended period of time.
This prevents battery acid from leaking into the battery compartment.
For optimum performance, aim the remote control directly at the player and make sure there
are no obstructions between the remote control and the player. The maximum operable
ranges from the unit are as follows.
Line of sight: approx. 7 m (original state)
Either side of the centre: approx. 5 m within 30° (original state)
Above: approx. 5 m within 30° (original state)
Below: approx. 5 m within 30° (original state)
(Sample Illustration) Remote control - effective range
