English
11
Prepare the remote control
Setting up the player
Always follow the instructions in this chapter in
sequence.
3. Close the battery cover.
Find the correct viewing input
1. Press to turn on this product.
2. Turn on the TV and switch to the correct video-in
input (refer to the TV user manual on how to
select the correct input).
Initial Setting
When you turn on this unit for the fi rst time, or
restore all settings to factory defaults, the system
will prompt you to perform Easy Setup.
1. Follow the on-screen instructions to customize
the following settings to your preference:
OSD Language
Resolution
Aspect
ratio
2. After setting, press OK to confi rm and exit.
Use the SETTING menu
1. Press SETTING to display the setup screen in
stop mode or no disc playback.
Use the HOME menu
1. Press HOME to display the Home screen in stop
mode or no disc playback.
- Line of sight: approx. 7 m
- Either side of the centre: approx. 5 m within 30°
- Above: approx. 5 m within 30°
- Below: approx. 5 m within 30°
• The maximum operable ranges from the
unit are as follows.
Note:
- Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radia
ti
on exposure or other unsafe opera
ti
on.
Notes:
- If you are not going to use the remote control for a
long
ti
me, remove the ba
tt
eries.
- Do not use old and new or di
ff
erent types of ba
tt
eries
in combina
ti
on.
- Risk of explosion! Keep ba
tt
ery away from heat,
sunshine or
fi
re. Never discard ba
tt
ery in
fi
re.
1. Open the battery cover.
2. Insert two AAA batteries with correct polarity
(+/-) as indicated.
5 m
5 m
7 m
4 Preparation
