2. PRINTER SETUP
ENGLISH VERSION EO1-33059
2.12 Position and Print Tone Fine Adjustment
E2-59
2.12 Position and Print
Tone Fine
Adjustment (Cont.)
After selecting a fine adjustment value, press the
[PAUSE]
key.
Cut/Strip Position Fine Adjustment
<3>ADJUST SET
CUT ADJ. +10.0mm
[RESTART]
[FEED]
CUT ADJ.+50.0mm
CUT ADJ.+49.5mm
CUT ADJ.+0.0mm
CUT ADJ.-49.5mm
CUT ADJ.-50.0mm
CUT ADJ.+0.5mm
CUT ADJ.-0.5mm
NOTES:
Choose a desired value by using the
[RESTART]
or
[FEED]
key.
Pressing the
[FEED]
key one time
causes a –0.5mm change, up to
–50.0 mm.
Pressing the
[RESTART]
key one
time causes a +0.5mm change, up
to +50.0 mm
.
Cut Position
Cut Position
Feed Direction
3mm
3mm
Feed Direction
Feed Direction
Cut Position
•
Example of Cut Position Fine Adjustment
When s3.0 mm
Compared with “+0.0mm” position, the cut position
is shifted forward.
When s0.0 mm
When setting –3.0 mm
Compared with “+0.0mm” position, the cut position
is shifted backward.
Summary of Contents for B-SX5T Series
Page 3: ...TEC Thermal Printer B SX5T SERIES Owner s Manual ...
Page 120: ...M EO1 33059 ...
