INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO15-33005
3. Bluetooth Module: B-EP700-BLTH-QM-R
3- 1
3. Bluetooth Module: B-EP700-BLTH-QM-R
Thank you for purchasing TOSHIBA Bluetooth module, B-EP700-BLTH-QM-R.
The B-EP700-BLTH-QM-R is an optional Bluetooth module for the B-EP2D/EP4D Series.
The pictures used in this document are those of the B-EP4D, but the installation procedure is common with
the B-EP2D unless otherwise noted.
•
Packing
List
The following parts are supplied with the kit. Make sure you have all items shown below.
Bluetooth Module (1 pc.)
FPC Cable (2 pcs.)
Installation Manual (1 copy)
•
Installation
Procedure
1.
Turn off the printer.
2.
Slide the battery lever in the direction of the arrow, and remove the battery pack from the printer.
3.
Remove the four tapping screws from the bottom cover.
1. Follow all manual instructions. Failure to do so could create safety hazards such as fire or
electrocution.
•
Manual instructions must be followed when installing option kits or adding cables to avoid
system failures and to insure proper performance and operation.
•
Failure to follow manual instructions or any unauthorized modifications, substitution or change to
this product will void the limited product warranty.
2. Turn the power off and remove the battery before installing the Bluetooth module.
3. Be careful not to pinch your fingers or hands with the covers.
WARNING!
Battery Lever
T-3x10 Tapping Screw
T-3x10 Tapping Screw
Battery Pack
