INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO15-33005
2. Wireless LAN Board: B-EP700-WLAN-QM-R
2- 8
14. Mount the right side cover to the printer while fitting the tabs on the right side cover into the slots of
the printer enclosure.
B-EP4D Series: Fit the tabs A to C into the slot A’ to C’.
B-EP2D Series: Fit the tabs A to C into the slot A’ to C’.
NOTE: It is easy to mount the right side cover if you fit the tabs from the LCD side in order, then secure
the bottom side. Be careful not to catch the cable by the cover while reassembling.
15. Close the top cover and load the battery pack. Set a region code and configure the wireless LAN
module settings in the system mode with reference to the PC setting tool operating specification and
the Service manual or Key Operation Specification.
In addition, about wireless module setting by Printer Setting Tool, please refer to Printer Setting Tool
Operating Specification.
Tab A
Tab B
Tab C
A’
B’
C’
Tab A
Tab B
Tab C
A’
B’
C’
Right Side Cover
