Installation Area
Before installing the machine, the location characterized
as follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0 C
5.Keep far away from fuel sources such as coal or gas
Unpacking The Washing Machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and
drain hose.
4. Pick up the inlet hose from the drum.
• Stability is important to prevent the product
from moving!
• Make sure that the product does not stand on
the power cord.
•
be
•
Packaging material (e.g. Films, Styrofoam) can
dangerous for children.
There
is
a
risk
of
suffocation
!
Keep all packaging
well away from
children.
materials
9
INSTALLATION
w
w
W>
20mm
Installation of the cabinet base cover
Soft fabric
Cabinet
base cover
Running the machine or washing while placing
on
the bottom foam is strictly forbidden
Lay the washing machine backward on the soft fabric .
Then Insert the cabinet base cover into washing machine
base trough, push into the end and tighten screw at one
position.
Warning!
Warning!
