background image

19

The following are not malfunctions.

BEFORE CALLING THE SERVICEMAN

When:

Check:

The first time you use your washing machine,
a small amount of water may drain out of the
drainage hose.

During operation the control panel gets warm.

The pulsator rotates bit by bit.

During washing and rinsing, lamps flickers.

During spinning, suddenly supplying the
water or rinsing.

Sloshing sounds of remaining water coming

from your washing machine after SPIN cycle

has been completed.

After pausing the machine during the spin

cycle, it will not starts immediately.

If operates the machine at spinning on and
off.

After water supply shut off or water with iron

rust appears.

The buzzer does not stop.

This is merely water lift over from the performance inspection performed
on your washing machine before it was shipped from the factory.

Because of the electronic parts radiate heat.

Because of preventing the laundry unbalancing, it rotates bit by bit.

It is the cause of the power source wiring in a house. If fluorescence light
be changed, it may improve condition.

Because load unbalance occurred and safety switch operated. The spin

will cycle resume after supplying water, rotating and correcting the
unbalanced load.

They are made by water retained by the machine for the purpose of

maintaining balance and do not indicate malfunction.

There are a short pause before the machine begins to spin as the

drainage valve opens sufficienty.

You may hear intermittent motor sound ("coon" sound) in spinning
process occurs, this is a sound which occurs in order to control rotation,

and not a malfunction.

Wait for water becomes clean. Returning type bleach can be used

(hydrohiter etc.) when iron rust adhered to the white colored clothes.  Avoid
using the bleach for colored articles.

If the CHILD PROOF mode is set to ON, and the lid is opened while the
machine is in operation, the buzzer beeps. Check inside the washing

machine. Press POWER to turn it off.

SPECIFICATIONS

HANDLING METHOD FOR EMERGENCY

When the machine takes on abnormal operation, please disconnect the power plug and send it to our service agency for handling.
Never disassemble the machine by yourself, for safety reasons.

Model

AW-1170SM

AW-9770SM

Type

Fully automatic washer

Washing

Vortex type

system

Overall

645 (Width) x 593 (Depth) x 1007 (Height)

dimension

Rated

10kg

9kg

capacity Dry clothes weight

Dry clothes weight

AW-1170SM

AW-9770SM

Rated period of operation 

Regular cycle 

55

 min. 

Standard amount of water

79L high water level

77L high water level

Standard water consumption 1

80

L 1

77

L

Weight                                                                40kg 

Water tap pressure

0.03~1MPa

Model

Summary of Contents for AW-1170SM





















Reviews: