background image

6

HOW TO  OPERATE

Preparation

1

Set drainage hose for drain.

2

Set the water supply hose correctly.

3

Turn the water faucet on.

Make sure that there are no sign of water leakage at water tap or inlet
valve.

4

Connect the power plug.

"REGULAR" "HEAVY WASH" "HEAVY RINSE" "SOAK"

"REGULAR" cycle

Water lavel, water current and time are auto-
matically selected according to the quantity and
type of laundry detected automatically.
Put the laundry evenly and confirmly.
If it is not, the lower water level water may be set.

"HEAVY WASH" cycle

It is especially for heavy soiled clothes.
It washes with stronger water current 

"HEAVY RINSE" cycle

By washing in combination with the
"REGULAR" course, the number of times for
rinsing increases by one turn. When "HEAVY
RINSE: maximum" is chosen, this mode is
memorized. "HEAVY RINSE" illuminates by
turning on the switch from next time.

 "HEAVY 

RINSE

" provides water supply for

three times. Rinsing process is displayed
by all the lamps illuminating; 1 TIME,
2 TIMES and OVER FLOW

"SOAK" cycle

This method is used to wash clothing which
easily absorbs stain and clothes with
noticeable stains.

 The time requirement is 1

hour,2 ,3

hour

s .

Rinsing is set to "OVERFLOW RINSE".

If you add the laundry during washing, be sure to press 

 button.

After stopping the basket, put the laundry in it.

If the CHILD PROOF mode is set to ON, and the lid is opened while the machine is in operation, the buzzer beeps and the
CHILD PROOF indicator flashes then the machine starts draining water.

1

Turn the POWER on.

"REGULAR" and "CONDENSED BUBBLE" cycles will be selected
automatically.

CONDENSED BUBBLE

The washer starts flowing water at the low level to absorb the concen
trated detergent into the laundry in order to remove the dirt efficiently.

2

Turn the POWER on.

The "REGULAR" lamp will light up.

3

Put the laundry in the basket.

In case of selecting "SUPER SPIN DRY" cycle, please see page 8 for
details.

4

Press the 

 button to select "REGULAR" "HEAVY WASH" "HEAVY

RINSE" "SOAK".

5

Press 

 button.

The pulsator automatically detects the laundry amount, and indicates
the amount of concentrated detergent suitable for the laundry amount.

Put in the detergent 

into 

detergent 

dispenser according to 

7

Close the lid.

If you keep the lid opening, the cycle will stop before spin.

 Avoid your finger caught when closing the lid.

Cycle end

T

he power 

turn 

off

 automatically

.

 

A "beep" sound will be heard when operation is finished .

5

6

4

1

1

2

3

4

        

the detergent guide.

Summary of Contents for AW-1170SM





















Reviews: