2.
Plug the other smaller connector of the Micro-USB cable into the
Micro-USB port on your tablet.
The Micro-USB connector of the Micro-USB cable must be correctly
plugged into the Micro-USB port on the tablet. Failure to do so correctly
might result in possible damage to the Micro-USB port.
Figure 3-4 Connecting the AC adaptor 2
2-pin
3-pin
3.
Plug the AC adaptor into a live wall outlet.
Wall outlet
The fastest way to charge your tablet is with the included AC adaptor
plugged into a wall outlet.
USB charge
In “suspend or shutdown mode,” you can also charge your tablet,
although more slowly, by connecting the Micro-USB cable to the USB
port on your PC. Make sure your PC is turned ON while charging via
USB. If your PC is turned OFF, depending on PC specifications, the
tablet battery may discharge. We recommend that you do not use your
tablet while charging via USB as auto shutdown may occur if the
battery charge is too low.
Turning on the power
This section describes how to power up your tablet.
Press & hold
Power
button for two seconds to turn on the tablet.
Figure 3-5 Turning on the tablet
1
1. Power button
Initial Setup
The Setup Screen will be the first screen displayed when you turn on the
power. Setup your tablet according to the following steps:
User's Manual
3-8
