Service Manual
16
OUT1
Pin 1
Pin 2
OUT2
Pin 3
Pin 4
CN4 connector (bottom right). I/O signals (optional).
Pin Name
Description
1 OUT1
Pin1 and Pin2 are a free-voltage contact when the OUT1 is ON
2 OUT1
3 OUT2
Pin3 and Pin4 are a free-voltage contact when the OUT2 is ON
4 OUT2
5 V24
Power 24V (external)
6 GND
0V ground (external)
Notes:
The connector is not supplied with the APLEX, only with the accessory.
There is an optional kit to use these signals. This kit includes the connector, in/out board,
harness and screws and instructions.
OUT1 & OUT2 functionality can be configured on APLEX configuration menu.
IN signal can be used to clear any APLEX error. This avoids the need to push the TEST
button when any error appears.
Output circuit: OUT1 & OUT2, normally OPEN
Input circuit:
IN
Pin 5 (+24V)
Pin 6 (GND)
