Toshiba A60-S156 User Manual Download Page 141

Page: 141 / 236

7-5

HW S

ETUP

AND

ASSWORDS

HW Setup window

Always Low

CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption
and low speed.

HT Technology

Configures the Hyper-Treading Technology.

Enabled with PM

Enable the Hyper- Treading Technology with
Power Management.

Enabled without PM

Enable the Hyper-Treading Technology
without Power Management.

Disabled

Disable the Hyper-Treading Technology.

Boot Priority

Boot Priority Options

This option sets the priority for booting the computer. Select from the following
settings:

HDD

−>

FDD

−>

CD-ROM -> LAN

The computer looks for bootable files in

the following order: HDD, diskette drive,
CD-ROM* and LAN. (Default)

FDD

−>

HDD

−>

CD-ROM -> LAN

The computer looks for bootable files in the

following order: diskette drive, HDD, CD-
ROM* and LAN.

HDD

−>

CD-ROM -> LAN -> FDD

The computer looks for bootable files in

the following order: HDD, CD-ROM*, LAN
and diskette drive.

FDD

−>

CD-ROM -> LAN -> HDD

The computer looks for bootable files in

the following order: diskette drive, CD-
ROM*, LAN and HDD.

CD-ROM -> LAN -

HDD

−>

FDD

The computer looks for bootable files in

the following order: CD-ROM*, LAN,
HDD, diskette drive.

CD-ROM -> LAN ->

FDD

−>

HDD

The computer looks for bootable files in

the following order: CD-ROM*, LAN,
diskette drive and HDD.

Summary of Contents for A60-S156













































































































































































































































Search results

Summary of Contents for A60-S156

Reviews:

Related manuals for A60-S156

Brands by name

Popular brands

Toshiba A60-S156, User Manual

Search results

Summary of Contents for A60-S156

Reviews:

Related manuals for A60-S156

Brands by name

Popular brands