manualshive.com logo in svg

Toshiba 7130, Resource Manual

Share
Download
Toshiba 7130 Resource Manual Download Page 41

41

Mobile computing

5.375 x 8.375 ver 3.1

❖

Flashes amber when the main battery charge is low and it 
is time to recharge the main battery or plug in the AC 
adaptor

HINT: Be careful not to confuse the battery light 

(

) 

with the on/off 

light 

(

)

. 

When the on/off light flashes amber, it indicates that the system is 
suspended (using the Windows

®

 operating system Standby 

command).

TECHNICAL NOTE: The recharging of the battery cannot occur when 
your computer is using all of the power provided by the AC adaptor 
to run applications, features, and devices. Your computer's Power 
Saver utility can be used to select a power level setting that reduces 
the power required for system operation and will allow the battery to 
recharge.

Setting battery alarms

Your computer can be configured to warn you when the 
battery is running low. For more information, see “Setting 
battery alarms” in the electronic user’s guide.

Changing the main battery

When your main battery has run out of power, you have two 
options: plug in the AC adaptor or install a charged main 
battery. 

Never short circuit the battery pack by either accidentally or 
intentionally bringing the battery terminals in contact with another 
conductive object. This could cause serious injury or fire, and could 
also damage the battery pack and computer.

❖

Never expose a battery pack to abnormal shock, vibration or 
pressure. The battery pack's internal protective device could 
fail, causing it to overheat or ignite, resulting in caustic liquid 
leakage, or explosion or fire, possibly resulting in death or 
serious injury.

TECHNICAL NOTE: To avoid losing any data, save your files and 
then either completely shut down your computer or put it into 
Hibernation mode before changing the main battery.

Summary of Contents for 7130

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands