65/5560 PRECAUTIONS
MAY.1997 © TOSHIBA CORP.
2
4.
Main Service Parts for Safety
•
The thermofuse,thermistor,fuse,breaker and door switches,thermostat etc. are particularly important
for safety.Be sure to handle/install them properly.
5.
Notice Labels
•
Be sure to check the rating plate and the notice labels such as "Unplug the power cord during
service" ,"Hot area" ,etc. to see if there is any dirt on their surface or if they are properly stuck to
the copier during servicing.
6.
Disposition of Consumable Parts/Packing Materials
•
Regarding the recovery and disposal of the copier, supplies, consumable parts and packing
materials, it is recommended to follow the relevant local regulations or rules.
7.
When parts are disassembled, reassembly is basically the reverse of disassembly unless otherwise
noted in this manual or other related documents. Be careful not to reassemble small parts such as
screws, washers, pins, E-rings, toothed washers in the wrong places.
8.
Basically, the machine should not be operated with any parts removed or disassembled.
9.
Precautions Against Static Electricity
•
The PC board must be stored in an anti-electrostatic bag and handled carefully using a wristband,
because the ICs on it may be damaged due to static electricity.
