background image

112 

Picture and Sound Controls

Using the advanced picture settings features

 

NOTE

 

Some of the Advanced Picture Settings features will not be available for 

adjustment when the picture mode is set to AutoView.

Edge Enhancer

If the 

Edge Enhancer

 set to 

On

, the clarity levels can be adjusted 

automatically.

Press the 

SETUP

 button.

Select 

Picture

 > 

Advanced Picture Settings

 > 

Edge Enhancer

 

and press the 

OK

 button.

Press the 

p

/

q

 (arrow) buttons to select 

On

.

Press the 

EXIT

 button.

 

NOTE

 

  If the picture mode is set to 

AutoView

Edge Enhancer

 is not 

available.

 

This feature may not work properly depending on the content.

 

Noise may appear on the image depending on the device connected to 

the TV (e.g. a device with a specific enhancer function).

Dynamic Contrast

Dynamic Contrast detects changes in picture quality that affect the 

appearance of your contrast settings and then automatically adjusts the 

video.

Press the 

SETUP

 button.

Select 

Picture

 > 

Advanced Picture Settings

 > 

Dynamic Contrast

 

and press the 

OK

 button.

Press the 

p

/

q

 (arrow) buttons to select 

High, Middle, Low, 

or

 

Off

.

Press the 

EXIT

 button.

 

Using the advanced picture settings features

Summary of Contents for 58L7350U







































































































































































































Reviews: