Toshiba 5205-S119 User Manual Download Page 59

Page: 59 / 312

Getting Started

Using the computer for the first time

5.375 x 8.375 ver 2.4.0

Using the computer for the first time

Opening the display panel

Slide the display latch to the right and lift the display panel

Opening the display panel

CAUTION: To avoid damaging the display panel, don’t force it
beyond the point where it moves easily.

Never lift or move the computer using the display panel.

Turning on the power

Check that all the drives are empty.

If you have a printer connected to your computer, turn on
the printer and wait until the printer indicates that it is
ready (on line).

Turn on the computer by pressing the power button
located above the keyboard.

Slide

Lift

Summary of Contents for 5205-S119

























































































































































































































































































































Search results

Summary of Contents for 5205-S119

Reviews:

Related manuals for 5205-S119

Brands by name

Popular brands

Toshiba 5205-S119, User Manual

Search results

Summary of Contents for 5205-S119

Reviews:

Related manuals for 5205-S119

Brands by name

Popular brands